A car pressure washer, as its name suggests, is used for detailing cars, trucks, and most of the other automobiles. These are pressure wash machines, capable of cleaning automobile exteriors without damaging the surface.
These machines wash away dirt and impurities stuck on the surface with high pressure. The efficiency of these machines is never in question. A car pressure washer is capable of removing almost any kind of dirt and impurity present on vehicle surfaces, including dust, grease, and oil residues. The problem is related to the safety of the vehicle.
Is using pressure wash systems too dangerous to the automobiles? The answer is no. However, you have to understand the following dos and don’ts about car pressure washer machines for using these machines effectively.
Do not use high pressure machines
A pressure wash system’s effectiveness is usually measured by its output pressure. The higher is the pressure level, the greater will be the effectiveness of the machine. This is not true for power washers used for auto detailing though. Here, the power washers should not have a very high pressure.
Some of the brands offer specially-made car pressure washer models. It is better to use these models for cleaning vehicles. The output pressure of these machines should not exceed 1500 psi. Power washers are used mainly for cleaning the exterior of vehicles. Using a really high-powered machine would result in the paint damage.
Use a low-flow machine
Flow rate of a pressure washing machine refers to the quantity of water passed onto the surface. It is denoted by gallons per minute (gpm).
It is a more significant specification for auto detailing than for other cleaning tasks. For an auto detailing equipment, the flow rate has to be as low as possible, for two reasons. First, the best pressure washer machines having a low flow rate transfer only low quantities of water onto the surface, leading to fast cleaning.
Second, using an auto detailing equipment with a low flow rate would result in the reduction of water wastage.
The third benefit pertains to mobile auto detailing. It involves taking the portable car wash machines to the customer’s garage and cleaning the vehicle. If the drainage facilities are poor, using a portable car wash machine with a high flow rate is a big risk.
In such cases, it is better to use mobile car wash equipment having a low flow rate. Modern mobile car wash equipment having a flow rates as low as 0.5 gpm are available in the market now.
So, the best pressure washer machines for auto detailing have a pressure level of less than 1500 psi and a flow rate as low as possible, preferably less than 2 gpm.
Make your purchase decision very carefully. Look into all the important features, check out for the best brand, and then buy the machine. A wrong machine can make the cleaning task quite tedious. For easy, fast, and efficient cleaning, you require a machine that comes with all the above mentioned features.